木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

The effects of crystal structure on optical absorption/photoluminescence of bis(8-hydroxyquinoline)zinc

In this paper, the transformation processes of two types of bis(8-hydroxyquinoline)zinc: Znq₂ dihydrate and anhydrous (Znq₂)₄ were investigated by X-ray diffraction (XRD), infrared spectra (IR), scanning electron microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetry (TG). The effects of crystal structure on optical properties of bis(8-hydroxyquinoiline)zinc were analyzed. Znq₂ dihydrate can be transformed into anhydrous (Znq₂)₄ during heating under vacuum. Reversal transformation occurs by the interaction between chloroform and (Znq₂)₄. But (Znq₂)₄ was partially transformed into Znq₂ dihydrate by the interaction between ethanol and (Znq₂)₄. The different molecular structure results in different crystal stacking and electronic structure, thereby affect its optical properties.     

关于1+1维可积系统的代数结构与Riemann-Hilbert变换

1+1维经典可积系统的隐代数结构用Riemann-Hilbert变换进行一般性讨论。新的Loop代数用Yang-Baxter等式的解给出,并指出它与基本Poisson-Lie括号的一致性。系统的Virasoro代数结构由系统的共形不变性导出。     

两种以Znq2为基体的新型电致发光材料的合成与性能

以8-羟基喹啉为配体的金属配合物是一种性能优良的有机电致发光材料,其中有关8-羟基喹啉铝(Alq₃)研究已有大量报道,8-羟基喹啉锌(Znq₂)研究还有待发展。介绍了两种以Znq₂为基体的新型有机电致发光材料Znq₂(H₂O)₂和(Znq₂)₄的合成方法。用IR、XRD、TG、DTA和荧光测试方法进行表征与分析表明:Znq₂(H₂O)₂和(Znq₂)₄的玻璃化温度(T_g)分别为104.2℃和204.9℃;在161℃下Znq₂(H₂O)₂脱去水分子成为Znq₂,在361℃高温下四聚体(Znq₂)₄裂解为单体Znq₂;Znq₂(H₂O)₂和(Znq₂)₄具有很好的发光性能,在光致发光谱中λ_max分别是505,550nm。     

理想微裂纹系统中的随机扩展效应

本文讨论了在理想微裂纹系统中,由于微裂纹的随机性扩展,对微裂纹统计演化产生的效应。文中提供了一般的理论框架,给出了便于处理的转移概率的表达式。最后,用数值计算的例子展示了随机模型的统计演化特征,并比较了与确定性扩展模型下统计演化的异同。     

陆生植物黑麦草(Lolium multiflorum)对富营养化水体修复的围隔实验研究——氨氮的净化效应及其动态过程

采用浮床黑麦草（Lolium multi florum）对畜禽养殖富营养水体氨氮的净化效应及动态过程进行了研究．结果表明：浮床黑麦草对富营养水体中的氨氮具有明显的净化效果．当覆盖率30％时，对氨氮的去除率最高可达到95．89％．对其去除水体氨氮的动态过程拟合表明符合三次方程曲线．该研究为冬季陆生植物修复富营养水体提供重要依据．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

吡啶-2-羧酸合成工艺的改进

毗啶-2-羧酸是一种重要的有机合成中间体,其用途非常广泛。本文对合成该物质所用的高锰酸钾氧化2-甲基吡啶法进行了优化,提高了收率,减少了后处理的时问,有利于降低生产成本。研究结果表明,用高锰酸钾氧化-2-甲基毗啶时,将水的相对用量由文献报道的约400ml减少为150ml,相应的将反应的温度由100℃降到80℃后,收率可达56.2%,高于文献报道的50.0%。     

磷酸三乙酯改性HZSM-5沸石的活性及理论研究

采用XRD表征了水蒸气和磷联合改性的HZSM-5沸石分子筛的结构．通过NH3-TPD和N2吸附脱附研究了样品的酸性和比表面．采用正庚烷的裂化反应研究了样品的裂化活性，研究结果表明，磷改性样品与母体样品相比，经过水蒸气处理后显示出较高的酸量和正庚烷裂化活性．上述结果首次用模型簇和计算量子化学方法进行了解释．采用Gaussian94软件包和PM3半经验量子化学方法对模型簇进行了全优化和频率分析．计算结果显示磷改性后样品的脱铝补硅反应热大于母体样品脱铝补硅反应热，从而显示出磷对骨架的稳定化作用．